1/3" COLOR CMOS CAMERA MODULE (w/ I2C Bus Control)

This is a family of products based on advanced cmos mixed signal technology, an integrated image array, signal processing, timing & control circuitry - all on a single chip OV5016 - enabling all aspects of color video camera applications.

Velleman KitsDescription: K8000 Computer Interface Board For Ms Dos Pc'sTo enable a computer to communicate with the outside world it is usually fitted with a keyboard a display and perhaps a mouse. If however it is to be used in certain control applications or certain control functions are to be carried out then an interface is needed. The interface card here excels in its simplicity of use and installation. The card is connected in a very simple way to the printer port (there is no need to open up the computer). Likewise there is no need to install an extra printer port even if a printer is to be used. This can be connected to the card in the usual manner. Connection to the computer is optically isolated so damage to the computer from the card is not possible. The card is controlled in a simple way using Turbo Pascal@ procedures C++ and QBASIC. These procedures are pre-programmed and are provided along with a number of test and example programs on the diskette supplied.The card itself has 16 optically isolated digital connections which can be freely chosen as either inputs or outputs (eg. 6 inputs and 10 outputs) according to how they are set up by the user. Furthermore the card has 9 analogue outputs of which one is high precision and 4 analogue inputs. If this capacity is not sufficient for a particular application then up to 4 cards can be interconnected (1 master and 3 slaves) such that an enormous potential exists. See also Options The card can be used with many of our other kits such as:

A professional technician service tool kit in a metal reinforced tool case with heavy-duty handle and locks. A removable pallet handles most of the tools listed below with more room for tools and parts in the lower half. A special ramp in the tool case will lock your meter of choice in place.SR-2 - Deluxe Iron. 25W UL approved, 3 prong line cordSH-1 - Soldering iron stand base with spiral holder and spongeST-1 - Diagonal Cutter 4 1/2" with spring returnST-2 - Long nose pliers 5" with spring returnST-30 - Deluxe Wire StripperSE-1 - Solder Ease Kit 4 pc. Scrapper and BrushND-3 - Nut Driver SetTL-8 - 6pc Precision Screwdriver set in plastic caseST-5 - 6" Slot Screwdriver 3/16" tipST-6 - 6" Phillips Screwdriver #1ET-10 - IC PullerSP-2 - Desoldering Vacuum Pump, Aluminum housing with replaceable tipST-20 - Safety goggles, light weight/ventillatedST-9 - Pocket ScrewdriverST-4 - Solder 60/40 .031 pencil packSW-3 - 5 foot braid in plastic dispenserPocket for a meter (not included with kit)